manualshive.com logo in svg

Yamaha WC42260, Owner'S Manual

The Yamaha WC42260 Owner's Manual is a comprehensive guide designed to help you effortlessly navigate and operate your Yamaha WC42260. With step-by-step instructions and detailed illustrations, this manual ensures an optimal user experience. Download your free copy of the manual from our website 88.208.23.73:8080, and unlock the full potential of your Yamaha WC42260.

Share
Download
background image

254

Chapter 20—Remote Control

DM2000 Version 2—Owner’s Manual

Configuring User Defined Remote Layers

User Defined Remote Layers can be configured as follows.

1

Use the DISPLAY ACCESS [REMOTE] button to locate the Remote 1–4 pages.

2

Use the cursor buttons to select the parameters, and use the Parameter 
wheel, INC/DEC buttons, and [ENTER] button to set them.
TARGET: 

This is used to select the target for the currently selected Remote Layer (the User 

Defined target is explained here).

TRANSMIT: 

This enables and disables MIDI data transmission for the selected Remote 

Layer.

INITIALIZE: 

This initializes the settings of the currently selected bank.

BANK: 

These buttons are used to select banks 1, 2, 3, and 4. Each bank can contain MIDI 

settings for the 24 faders, Encoders, and [ON] buttons. Banks can be stored to an external 
MIDI device, such as a MIDI data filer, by using MIDI Bulk Dump (see page 220), or stored 
to SmartMedia (see page 271). Initially, bank 1 contains General MIDI (GM) volume and 
pan settings; bank 2, GM volume and effect; bank 3, XG volume and pan; bank 4, Nuendo 
VST mixer.

ID/SHORT/LONG: 

On Remote Layers, channel strips 1–24 are identified by the fixed IDs 

RM01–RM24. You can enter a Short and Long name for each Remote channel strip. Short 
names appear on the channel strip displays. To enter a name, use the cursor buttons to select 
the SHORT or LONG name, use the [SEL] buttons, Parameter wheel, or INC/DEC buttons 
to select the channel strips, and then press [ENTER]. When the Title Edit window appears, 
enter a name, and press OK when you’ve finished. See “Title Edit Window” on page 54 for 
more information.

ON: 

These parameters are used to specify the MIDI message (up to 16 bytes) to be trans-

mitted when an [ON] button is pressed. Use the [SEL] buttons to select the channel strips, 
and then edit as necessary. When a value from 00 to FF is specified, that value is transmitted 
when an [ON] button is pressed. For the SW setting, data value 7F is transmitted when an 
[ON] button is turned on, and data value 00 is transmitted when an [ON] button is turned 
off. The END setting specifies the end of the data. “–” means no data is transmitted.

UNLATCH/LATCH: 

This parameter determines the operation of the [ON] buttons: 

Latching or Non-latching. When set to UNLATCH, an ON value is transmitted when an 
buttons is pressed, and an OFF value is transmitted when it’s released. When set to LATCH, 
an ON value is transmitted when the button is pressed and that value is maintained when 
the button is released. The next time you press that button, the OFF value is transmitted.

LEARN: 

This button is used to turn on and off the Learn function, which can be used to 

learn what MIDI messages are being transmitted by external MIDI devices when their con-
trols or parameters are adjusted. When on, received MIDI messages are displayed in the 
DATA area. Only the first 16 bytes of data, starting with a Status bit, are displayed. 

Summary of Contents for WC42260




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for WC42260

Radio Shack 32-2058 User Manual preview
32-2058
Brand: Radio Shack Pages: 24
Strymon brigadier User Manual preview
brigadier
Brand: Strymon Pages: 8
Black Country Customs TI-BOOST Manual preview
TI-BOOST
Brand: Black Country Customs Pages: 4
Dimavery Super Chorus EPCH-50 User Manual preview
Super Chorus EPCH-50
Brand: Dimavery Pages: 10
Robusta LE CHEF Instruction Manual preview
LE CHEF
Brand: Robusta Pages: 20
Alexander F-13 Neo Flanger Manual preview
F-13 Neo Flanger
Brand: Alexander Pages: 2
ALLEN & HEATH MixWizard WZ3 20S User Manual preview
MixWizard WZ3 20S
Brand: ALLEN & HEATH Pages: 32
ADDAC System ADDAC107 Assembly Manual preview
ADDAC107
Brand: ADDAC System Pages: 17
Draper PM1400 Instructions Manual preview
PM1400
Brand: Draper Pages: 16
Draper 01099 User Manual preview
01099
Brand: Draper Pages: 20
L.R. Baggs ALIGN SERIES REVERB User Manual preview
ALIGN SERIES REVERB
Brand: L.R. Baggs Pages: 8
EarthQuaker Devices Dispatch Master Operation Manual preview
Dispatch Master
Brand: EarthQuaker Devices Pages: 2
Duronic SM100 Manual preview
SM100
Brand: Duronic Pages: 29
F1rstBuy MK-3701ED Operating Instructions Manual preview
MK-3701ED
Brand: F1rstBuy Pages: 7
T-Rex TONETRUNK User Manual preview
TONETRUNK
Brand: T-Rex Pages: 7
Morpheus DropTune Operating Instructions Manual preview
DropTune
Brand: Morpheus Pages: 9
Ecler MIMO88 User Manual preview
MIMO88
Brand: Ecler Pages: 36
Electric Druid FilterFX Project Construction Manual preview
FilterFX Project
Brand: Electric Druid Pages: 11

Brands by name

Popular brands

Load more brands