270
Chapter 21—Other Functions
DM2000 Version 2—Owner’s Manual
Using the User Defined Keys
Up to 16 functions from a list of over 200 can be
assigned to the USER DEFINED KEYS, and up to
eight assignment setups can be stored in banks A to
H. See page 283 for a list of initial bank assignments.
1
Use the USER DEFINED KEYS [DISPLAY] button to locate the User Defined
Key Assign page.
2
Use the cursor buttons to select the BANK buttons, A to H, and press [ENTER]
to select a bank.
The TITLE parameter box displays the name of the selected bank. Select the TITLE param-
eter box, then press [ENTER]. The Title Edit window appears, enabling you to enter a
name.
3
Use the cursor buttons to select from 1–16, then press [ENTER].
The following User Define Select window opens.
4
Move the cursor to the left column, then rotate the Parameter wheel or press
the [INC]/[DEC] buttons to select the function you wish to assign.
5
Select options in the center and right columns in the same way.
The items displayed in the center and right columns vary depending on the function
assigned in Step 4.
6
Use the cursor buttons to select YES, then press [ENTER].
When the window closes, the specified function is assigned to the selected User Defined
button.
When you select a function that recalls a specific Scene or library memory, you need to spec-
ify the number of the memory that you want recalled when the USER DEFINED KEY is
pressed. To do this, in the left-hand box, select the number parameter next to the Assign
button, and use the Parameter wheel or INC/DEC buttons to specify the number.
USER DEFINED KEYS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DISPLAY
