manualshive.com logo in svg

Yamaha WC42260, Owner'S Manual

The Yamaha WC42260 Owner's Manual is a comprehensive guide designed to help you effortlessly navigate and operate your Yamaha WC42260. With step-by-step instructions and detailed illustrations, this manual ensures an optimal user experience. Download your free copy of the manual from our website 88.208.23.73:8080, and unlock the full potential of your Yamaha WC42260.

Share
Download
background image

Important Information

 

3

 

DM2000 Version 2—Owner’s Manual

 

Important Information

 

Warnings

 

•

Connect this unit’s power cord only to an AC outlet of the type stated in this Owner’s Man-
ual or as marked on the unit. Failure to do so is a fire and electrical shock hazard.

•

Be sure to connect to an appropriate outlet with a protective grounding connection. 
Improper grounding can result in electrical shock.

•

Do not allow water to enter this unit or allow the unit to become wet. Fire or electrical shock 
may result.

•

Do not place heavy objects, including this unit, on top of the power cord. A damaged power 
cord is a fire and electrical shock hazard. In particular, be careful not to place heavy objects 
on a power cord covered by a carpet.

•

Do not place a container with liquid or small metal objects on top of this unit. Liquid or 
metal objects inside this unit are a fire and electrical shock hazard.

•

This unit is equipped with a dedicated ground connection to prevent electrical shock. 
Before connecting the power plug to an AC outlet, be sure to ground the unit. If the power 
cord has a three-pin plug, it will provide sufficient grounding so long as the AC outlet is 
grounded correctly.

•

Do not scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire 
and electrical shock hazard.

•

Do not remove the unit’s cover. You could receive an electrical shock. If you think internal 
inspection, maintenance, or repair is necessary, contact your dealer.

•

Do not modify the unit. Doing so is a fire and electrical shock hazard.

•

If lightning begins to occur, turn off the power switch of the unit as soon as possible, and 
unplug the power cable plug from the electrical outlet.

•

If there is a possibility of lightning, do not touch the power cable plug if it is still connected. 
Doing so may be an electrical shock hazard.

•

Use only the included power cord for this unit. Using other types may be a fire and electrical 
shock hazard.

•

The DM2000 has six rear-panel slots for installing mini-YGDAI cards. For technical rea-
sons, certain card combinations are not supported. Before installing any cards, check the 
Yamaha web site to if your card is compatible. Installing cards that are not endorsed by 
Yamaha may cause electrical shock, fire, or damage to the unit.

•

If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for a 
replacement. Using the unit with a damaged power cord is a fire and electrical shock hazard.

 

•

If you notice any abnormality, such as smoke, odor, or noise, or if a foreign object or liquid 
gets inside the unit, turn it off immediately. Remove the power cord from the AC outlet. Con-
sult your dealer for repair. Using the unit in this condition is a fire and electrical shock hazard.

 

•

Should this unit be dropped or the cabinet be damaged, turn the power switch off, remove 
the power plug from the AC outlet, and contact your dealer. If you continue using the unit 
without heeding this instruction, fire or electrical shock may result.

 

Cautions

 

•

Keep this unit away from the following locations: 

— Locations exposed to oil splashes or steam, such as near cooking stoves, humidifiers, etc. 
— Unstable surfaces, such as a wobbly table or slope. 
— Locations exposed to excessive heat, such as inside a car with all the windows closed, or 

places that receive direct sunlight. 

— Locations subject to excessive humidity or dust accumulation.

Summary of Contents for WC42260




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for WC42260

ZETRON 4010 Service Manual preview
4010
Brand: ZETRON Pages: 123
Gizmo 14582 Instructions Manual preview
14582
Brand: Gizmo Pages: 8
Oster FPSTHM3532 Instruction Manual preview
FPSTHM3532
Brand: Oster Pages: 14
IXOM Medora GridBee GS-12-Air Owner'S Manual preview
Medora GridBee GS-12-Air
Brand: IXOM Pages: 17
Electro-Voice EVT 5212 Service Manual preview
EVT 5212
Brand: Electro-Voice Pages: 8
sescom SES-DSLR-MIX1 User Manual preview
SES-DSLR-MIX1
Brand: sescom Pages: 5
Fender TRAPPER BASS DISTORTION Manual preview
TRAPPER BASS DISTORTION
Brand: Fender Pages: 8
TC Electronic Stereo Chorus/Flanger & Pitch Modulator User Manual preview
Stereo Chorus/Flanger & Pitch Modulator
Brand: TC Electronic Pages: 26
Marantz 7T Service Manual preview
7T
Brand: Marantz Pages: 28
Currys ESSENTIALS C15HMW10 Instruction Manual preview
ESSENTIALS C15HMW10
Brand: Currys Pages: 2
DeWalt DW134 Manual preview
DW134
Brand: DeWalt Pages: 72
DeWalt DWD241 Original Instructions Manual preview
DWD241
Brand: DeWalt Pages: 76
PedalPCB Tone Vendor MKI Wiring Diagram preview
Tone Vendor MKI
Brand: PedalPCB Pages: 5
PedalPCB Monarch Distortion Quick Start Manual preview
Monarch Distortion
Brand: PedalPCB Pages: 5
PuzzleSounds SFT DISTORTION Manual preview
SFT DISTORTION
Brand: PuzzleSounds Pages: 17
PuzzleSounds DEEP BLUE DELAY Manual preview
DEEP BLUE DELAY
Brand: PuzzleSounds Pages: 17
Mellerware PRIMA 150W Manual preview
PRIMA 150W
Brand: Mellerware Pages: 16
Cuisinart HM-70C - Hand Mixer Instruction Booklet preview
HM-70C - Hand Mixer
Brand: Cuisinart Pages: 17

Brands by name

Popular brands

Load more brands