manualshive.com logo in svg

Yamaha WC42260, Owner'S Manual

The Yamaha WC42260 Owner's Manual is a comprehensive guide designed to help you effortlessly navigate and operate your Yamaha WC42260. With step-by-step instructions and detailed illustrations, this manual ensures an optimal user experience. Download your free copy of the manual from our website 88.208.23.73:8080, and unlock the full potential of your Yamaha WC42260.

Share
Download
background image

384

Appendix C: MIDI

DM2000 Version 2—Owner’s Manual

13.4.27 Parameter change

(Remote meter)

When transmission is enabled by receiving a Request of Remote meter, the 
specified meter information is transmitted every 50 msec for 10 seconds. 
When you want to transmit meter information continuously, a Request 
must be transmitted continuously within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission has been enabled by a Request, the parameter specified 
by Address will be transmitted on the [Rx CH] channel at 50 msec intervals 
for a duration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if 
the PORT setting is changed.
If [Parameter change ECHO] is ON, this message will be retransmitted 
without change.

13.4.28 Parameter request

(Remote meter)

Reception

If [Parameter change RX] is ON and the [Rx CH] matches the Device 
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, data of the specified address is transmitted on the 
[Rx CH] at intervals of 50 msec as a rule, for a period of 10 seconds.
If Address UL= 0x7F is received, transmission of all meter data will be halt-
ed immediately. (disable)

Transmission

If [Parameter change ECHO] is ON, this message will be retransmitted 
without change.

13.4.29 Parameter change (Remote time counter)

When transmission is enabled by receiving a Request of Remote Time 
Counter, the Time Counter data is transmitted every 50 msec for 10 sec-
onds. When you want to transmit Counter information continuously, a 
Request must be transmitted within every 10 seconds.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When transmission is enabled by receiving a Request, the Time Counter 
information is transmitted on [RxCH] channel every 50 msec for 10 sec-
onds.
Transmission will be disabled if the power is turned off and on again, or if 
the PORT setting is changed.
If [Parameter change ECHO] is ON, this message will be retransmitted 
without change.

13.4.30 Parameter request (Remote time counter)

Reception

If [Parameter change RX] is ON and the [Rx CH] matches the Device 
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the Time Counter information is transmitted on the 
[Rx CH] channel every 50 msec for 10 seconds.
When the second byte of Address is received on 0x7F, data transmission 
will be halted immediately. (disable)

Transmission

If [Parameter change ECHO] is ON, this message will be retransmitted 
without change.

13.4.31 Parameter change

(Automix status)

When transmission is enabled by receiving a Request of Automix status, 
the Automix Status data is transmitted every second for 10 seconds. When 
you want to transmit the Automix Status information continuously, the 
Request must be transmitted continuously minimum within 10 seconds 
interval. The data is transmitted continuously while the transmission is en-
abled, even when the Automix Status on the DM2000 has been changed.

Reception

This is echoed if [Parameter change ECHO] is ON.

Transmission

When the transmission is set to enable by receiving a Request. The Auto-
mix Status data is transmitted on the [Rx CH] channel every second for 10 
seconds. The data is transmitted continuously while the transmission is 
enabled, even when the Automix Status on the DM2000 has been changed.
Transmission will be disabled if the power is turned off and on again, or if 
the PORT setting is changed.
If [Parameter change ECHO] is ON, this message will be retransmitted 
without change.

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture's ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00000110 06

DM2000

ADDRESS

00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

0mmmmmmm mm

ADDRESS LL

DATA

0ddddddd dd

data1 H

0ddddddd dd

Data1 L

:

:

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture's ID number (YAMAHA)

SUB STATUS

0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00000110 06

DM2000

ADDRESS

00100001 21

Remote meter

0mmmmmmm mm

ADDRESS UL

0mmmmmmm mm

ADDRESS LU

mmmmmmm

mm

ADDRESS LL

0ccccccc ch

Count H

0ccccccc cl

Count L

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture's ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00000110 06

DM2000

ADDRESS

00100010 22

Remote Time counter

0000tttt 0t

0:Time code, 1:Measure.Beat.Clock

0ddddddd dd

Hour / Measure H

0ddddddd dd

Minute / Measure L

DATA

0ddddddd dd

Second / Beat

0ddddddd dd

Frame / Clock

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture's ID number (YAMAHA)

SUB STATUS

0011nnnn 3n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00000110 06

DM2000

ADDRESS

00100010 22

Remote Time counter

0ddddddd dd

0:Transmission request, 
0x7F:Transmission stop request

EOX

11110111 F7

End of exclusive

STATUS

11110000 F0

System exclusive message

ID No.

01000011 43

Manufacture's ID number (YAMAHA)

SUB STATUS

0001nnnn 1n

n=0-15 (Device number=MIDI Channel)

GROUP ID

00111110 3E

MODEL ID (digital mixer)

MODEL ID

00000110 06

DM2000

ADDRESS

00100011 23

Automix status

00000000 00

0000dddd 0d

Automix status H

0000dddd 0d

Automix status L

EOX

11110111 F7

End of exclusive

Summary of Contents for WC42260




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for WC42260

DAPAudio DS-CDJ-250 MKII Product Manual preview
DS-CDJ-250 MKII
Brand: DAPAudio Pages: 20
DAPAudio GIG-12 Product Manual preview
GIG-12
Brand: DAPAudio Pages: 23
Farm Aid 680 Owner'S Manual preview
680
Brand: Farm Aid Pages: 21
PARASIT STUDIO Into the Unknown User Manual preview
Into the Unknown
Brand: PARASIT STUDIO Pages: 5
Inter-m CA-8320 Service Manual preview
CA-8320
Brand: Inter-m Pages: 19
Q-Pumps QIM Series Assembly And Installation Manual preview
QIM Series
Brand: Q-Pumps Pages: 24
Power Dynamics 171.156 User Manual preview
171.156
Brand: Power Dynamics Pages: 14
FAME Equalizer LEF-317 User Manual preview
Equalizer LEF-317
Brand: FAME Pages: 15
TC Electronic Blood Moon Phaser Quick Start Manual preview
Blood Moon Phaser
Brand: TC Electronic Pages: 2
Vonyx 172.974 Instruction Manual preview
172.974
Brand: Vonyx Pages: 16
Fulltone Musical Products Clyde Deluxe User Manual preview
Clyde Deluxe
Brand: Fulltone Musical Products Pages: 2
Full Boar 0248909 Instruction Manual preview
0248909
Brand: Full Boar Pages: 14
Audio Technica ATDM-0604 User Manual preview
ATDM-0604
Brand: Audio Technica Pages: 80
IBE KL100 Instruction Manual preview
KL100
Brand: IBE Pages: 23
Dunlop FUZZ FACE FFM1 Manual preview
FUZZ FACE FFM1
Brand: Dunlop Pages: 2
PRS Guitars HORSEMAT TRANSPARENT OVERDRIVE Instruction Manual preview
HORSEMAT TRANSPARENT OVERDRIVE
Brand: PRS Guitars Pages: 8
Toolex 511163 Instruction Manual preview
511163
Brand: Toolex Pages: 12
Neve 8804 Fader Pack User Manual preview
8804 Fader Pack
Brand: Neve Pages: 21

Brands by name

Popular brands

Load more brands