manualshive.com logo in svg

Yamaha WC42260, Owner'S Manual

The Yamaha WC42260 Owner's Manual is a comprehensive guide designed to help you effortlessly navigate and operate your Yamaha WC42260. With step-by-step instructions and detailed illustrations, this manual ensures an optimal user experience. Download your free copy of the manual from our website 88.208.23.73:8080, and unlock the full potential of your Yamaha WC42260.

Share
Download
background image

Rear Panel

49

DM2000 Version 2—Owner’s Manual

K

2TR OUT DIGITAL AES/EBU 1 & 2

These XLR-3-32-type connectors output AES/EBU format digital audio, and are typically 
connected to the digital stereo inputs of 2-track recorders. The following signals can be 
patched to these outputs: Stereo Out, Bus Outs, Aux Sends, Matrix Sends, Direct Outs, 
Insert Outs, and Control Room. The sampling rate of the digital audio output can be set 
independently of the DM2000 sampling rate by using the internal sampling rate converters. 
Dither can be applied for digital audio transfer to lower-resolution systems. See “2TR Dig-
ital Outs” on page 68 for more information.

L

2TR IN DIGITAL COAXIAL 3

This phono connector accepts consumer format (IEC-60958) digital audio, and is typically 
used to connect the digital stereo output of a 2-track recorder. Signals connected here can 
be monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL 
ROOM [2TR D3] button. In addition, this input can be patched to Input Channels or 
Insert Ins. Unsynchronized digital audio signals can be converted by the internal sampling 
rate converters. See “2TR Digital Ins” on page 69 for more information.

M

2TR IN DIGITAL AES/EBU 1 & 2

These XLR-3-31-type connectors accept AES/EBU format digital audio, and are typically 
used to connect the digital stereo outputs of 2-track recorders. Signals connected here can 
be monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL 
ROOM [2TR D1] button or [2TR D2] button. In addition, these inputs can be patched 
Input Channels or Insert Ins. Unsynchronized digital audio signals can be converted by the 
internal sampling rate converters. See “2TR Digital Ins” on page 69 for more information.

N

METER port

This 15-pin D-sub connector is for connecting the optional MB2000 Peak Meter Bridge.

O

CONTROL port

This 25-pin D-sub connector provides access to the GPI (General Purpose Interface) 
through which external equipment can be triggered when specified DM2000 faders or 
USER DEFINE KEYS are operated. It can also be used to control a “RECORDING” light 
outside of a studio, to trigger the Solo function of an 02R Digital Recording Console, or to 
turn on Talkback from an external device. See “GPI (General Purpose Interface)” on page 
264 for more information.

P

REMOTE port

This 9-pin D-sub connector can be used to connect an optional Yamaha AD8HR/AD824 
AD Converter, providing remote and recallable control of its head amp settings. Machines 
that support the Sony P2 protocol can also be controlled from the DM2000 via this port. A 
straight cable should be used to connect a P2 device; a reversed cable for an AD8HR/AD824. 
See “Controlling AD8HR/AD824 A/D Converters” on page 267 and “About Machine Con-
trol (MMC & P2)” on page 256 for more information.

Q

MIDI IN, OUT & THRU ports

These standard MIDI IN, OUT, and THRU ports are used to connect the DM2000 to other 
MIDI equipment. Supported MIDI messages include Program Changes for Scene recall, 
Control Changes and Parameter Changes for real-time parameter control, Bulk Dump for 
data storage, MIDI Clock, MTC, and MMC. See “MIDI I/O” on page 215 for more infor-
mation.

R

CASCADE IN & OUT ports

These 64-pin connectors can be used to cascade up to four DM2000s to create a multi-
ple-unit mixing system. The DM2000 can also be cascaded with an 02R Digital Recording 
Console. See “Cascading Consoles” on page 74 for more information.

Summary of Contents for WC42260




















































































































































































































































































































































































































Reviews:

No comments

Related manuals for WC42260

STS M2-H Operator'S Manual preview
M2-H
Brand: STS Pages: 71
Zenman Budda User Manual preview
Budda
Brand: Zenman Pages: 25
Spirit Digital 328 User Manual preview
Digital 328
Brand: Spirit Pages: 20
Pro Audio MC 9010 iP User Manual preview
MC 9010 iP
Brand: Pro Audio Pages: 29
Dash Go SMARTSTORE SHM01DS Instruction Manual preview
SMARTSTORE SHM01DS
Brand: Dash Go Pages: 28
Vonyx 172.974 Instruction Manual preview
172.974
Brand: Vonyx Pages: 16
Doyon DOMIX45 User Instruction Manual preview
DOMIX45
Brand: Doyon Pages: 32
Mackie 1402-VLZ PRO Owner'S Manual preview
1402-VLZ PRO
Brand: Mackie Pages: 51
4ms Company Dual Looping Delay User Manual preview
Dual Looping Delay
Brand: 4ms Company Pages: 20
YATO YG-03059 Manual preview
YG-03059
Brand: YATO Pages: 46
LD AM 8 LDAM8 User Manual preview
AM 8 LDAM8
Brand: LD Pages: 64
Yamato 93249 Instruction Manual preview
93249
Brand: Yamato Pages: 17
Rane TTM 54 Operator'S Manual preview
TTM 54
Brand: Rane Pages: 6
Rane Scratch Live TTM 57SL Operator'S Manual preview
Scratch Live TTM 57SL
Brand: Rane Pages: 60
Gemini KL-19 Operation Manual preview
KL-19
Brand: Gemini Pages: 6
Gemini FX-7000 Operation Manual preview
FX-7000
Brand: Gemini Pages: 16
Perles ME110 Operating Instructions Manual preview
ME110
Brand: Perles Pages: 14
Gorenje MMC700W Instructions For Use Manual preview
MMC700W
Brand: Gorenje Pages: 44

Brands by name

Popular brands

Load more brands