20
Adjusting the DS-XG Mixer Control Settings
Once all DS-XG device drivers are installed, you can use the Windows standard volume control to adjust the
volume level of selected audio devices by following the procedures in this section.
1
Click on the Speaker icon located in the bottom rightmost corner of the Windows taskbar.
2
The DS-XG mixer control starts and the Volume Control window is displayed as shown below.
3
Adjust the volume as desired for each audio device by dragging the slide-bars vertically. You may also
click on [Options] in the menu bar and then click on [Properties].
4
To access the advanced controls for the Microphone device, first click on the “Mute” box and then click
the [Advanced] button as below.
WF192e.qx 5/21/98 9:16 PM Page 20