58
2.1.3.5 Drums Setup Data parameter change
See Tables 1-1 and 1-5.
If a Drum Setup Reset parameter change message (Table 1-
2) is received, the Drum Setup parameter values will be
initialized. Selecting a Drum Set will cause the Drum Setup
parameter values to be initialized.
2.1.4 VL70-m Native Parameter Change
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1n
Device Number
01010111
57
Model ID
0aaaaaaa
aa
Address High
0aaaaaaa
aa
Address Mid
0aaaaaaa
aa
Address Low
0ddddddd
dd
Data
|
|
11110111
F7
End of Exclusive
2.1.4.1 S-VA System parameter change
See Table 2-1.
2.1.4.2 S-VA Current Voice/Common Misc
parameter change
See Table 2-2.
2.1.4.3 S-VA Part parameter change
See Table 2-3.
2.1.4.4 S-VA Current Voice/Element parameter
change
See Table 2-4.
2.1.5 Other parameter changes
2.1.5.1 Master Tuning
11110000
F0
Exclusive status
01000011
43
YAMAHA ID
0001nnnn
1n
Device Number
00100111
27
Model ID
00110000
30
Sub ID2
00000000
00
00000000
00
0mmmmmmm
mm
Master Tune MSB
01111111
11
Master Tune LSB
Occccccc
cc
irrelevant
11110111
F7
End of Exclusive
This message simultaneously changes the pitch of all
channels.
3. REALTIME MESSAGES
3.1 Active Sensing
Once FE has been received, if no MIDI data is
subsequently received for longer than an interval of
approximately 300msec, the WF192XG soundcard will
perform the same function as when ALL SOUNDS OFF,
ALL NOTES OFF, and RESET ALL CONTROLLERS
messages are received, and will then return to a status
in which FE is not monitored.
WF192app.qx 5/21/98 9:41 PM Page 58
