3 - 38
INSP
ADJ
FRONT FORK COMPRESSION DAMPING FORCE
ADJUSTMENT
EC36J001
FRONT FORK COMPRESSION DAMPING
FORCE ADJUSTMENT
1. Remove:
●
Rubber cap
2. Adjust:
●
Compression damping force
By turning the adjuster
1
.
●
STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
* For AUS, NZ and ZA
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
3. Install:
●
Rubber cap
Stiffer
a
→
Increase the compression
damping force. (Turn the adjuster
1
in.)
Softer
b
→
Decrease the compression
damping force. (Turn the adjuster
1
out.)
Extent of adjustment
Maximum
Minimum
Fully turned in
position
20 clicks out
(from maximum
position)
T
R
.
.
Standard position:
14 clicks out
* 15 clicks out
Summary of Contents for WR250F(P)
Page 604: ...5 67 CHAS REAR SHOCK ABSORBER 8 Install Band 1 Taillight connector 2...
Page 692: ......
Page 693: ......
