2 - 23
SPEC
CABLE ROUTING DIAGRAM
×
Pass the cylinder head breather hose on the
inside of the radiator hose 1 and on the outside of
the radiator pipe (radiator hose 4). Make sure that
the cylinder head breather hose does not go for-
ward of the chassis.
Ø
Pass the starter motor lead in front of the radiator
hose 4.
Ù
Pass the clutch cable through the cable guide.
Ú
Pass the wire harness on the outside of the neu-
tral switch lead and AC magneto lead.
Û
Fit the brake hose into the guides on the protector.
Ü
Pass the wire harness, clutch cable and light
switch lead through the cable guide.
Ý
Fasten the AC magneto lead, neutral switch lead
and light switch lead to the cable guide at their
protecting tube with a plastic locking tie and cut off
the tie end.
Þ
Pass the carburetor breather hoses, carburetor
overflow hose and coolant reservoir breather hose
so that the hoses do not contact the rear shock
absorber.
www.PlanDeGraissage.org
