Instrument an
d
control functions
6-31
6
EAUN3921
Win
d
screen
To suit the rider’s preference, the wind-
screen height can be changed to one
of two positions.
To chan
g
e the win
d
screen hei
g
ht to
the hi
g
h position
1. Remove the bolt access covers by
removing the quick fasteners.
2. Remove the windscreen by re-
moving the bolts.
3. Install the windscreen to the high
position by installing the bolts, and
then tighten the bolts to the spec-
ified torque.
WARNING! A loose
win
d
screen coul
d
cause an ac-
ci
d
ent. Be sure to ti
g
hten the
screws to the specifie
d
torque.
[EWAN0080]
4. Place the bolt access covers, and
then install the quick fasteners.
1. Windscreen
1
1. Quick fastener
2. Bolt access cover
1. Bolt
1
2
1
1
1. Bolt
Ti
g
htenin
g
torque:
Windscreen bolt:
7 N·m (0.7 kgf·m, 5.2 lb·ft)
1
1
UBKA10E0.book Page 31 Thursday, September 22, 2022 1:40 PM