background image

To avoid humidity from sprea-
ding through the storage com-
partment, wrap wet articles in
a plastic bag before storing
them in the compartment.

Since the storage compart-
ment may get wet while the
scooter is being washed, wrap
any articles stored in the com-
partment in a plastic bag.

Do not keep anything valuable
or breakable in the storage
compartment.

EWAT1051

s

s

WARNING

Do not exceed the load limit of
5 kg (11 lb)  for the rear storage
compartment.

Do not exceed the maximum
load of 180 kg (397 lb) for the
vehicle.

EAU14541

Storage compartment

To open the storage compartment

1. Front storage compartment 

1. Lock.
2. Front storage compartment

Insert the key into the lock, turn it
clockwise, and then pull on it to open
the storage compartment lid.

To close the storage compartment

Push the storage compartment lid
into the original position, and then
remove the key.

EWA10961

s

s

WARNING

Do not exceed the load limit of
1 kg (2.2 lb) for the storage
compartment.

Do not exceed the maximum
load of 180 kg (397 lb) for the
vehicle.

INSTRUMENT AND CONTROL FUNCTIONS

3-16

3

1C0-F8199-E5.QXD  3/10/08 05:56  Página 31

Summary of Contents for XMAX 250i





























































































Reviews: