4NBSULFZTZTUFN
4-7
EAU76892
.BJOTXJUDI
The main switch is used to turn the ve-
hicle power on and off, lock and unlock
the steering, and open the seat, fuel
tank cap lid and storage compartment
A. After pushing the main switch knob
and confirmation with the smart key
has taken place, the main switch can
be turned while the smart key system
indicator light is on (approximately 4
seconds).
8"3/*/(
EWA18720
/FWFS UVSO UIF NBJO TXJUDI UP
i0''w i wPSi01&/wXIJMFUIFWF
IJDMFJTNPWJOH0UIFSXJTFUIFFMFD
USJDBM TZTUFNT XJMM CF TXJUDIFE PGG
XIJDINBZSFTVMUJOMPTTPGDPOUSPMPS
BOBDDJEFOU
5*1
Do not push the main switch knob re-
peatedly or turn the main switch back
and forth beyond normal use. Other-
wise, to protect the main switch from
damage, the smart key system will
temporarily disable and the smart key
system indicator light will flash. If this
occurs, wait until the indicator light
stops flashing before operating the
main switch again.
The main switch positions are de-
scribed below.
EAU76500
0/ PO
All electrical circuits are supplied with
the power, and the engine can be start-
ed.
To turn the vehicle power on
1. Turn the smart key on and bring it
within operating range.
1. Main switch
2. Main switch knob
1. Smart key system indicator light “
”
2
1
1
1. Push.
2. Turn.
1
2
3. While the smart key system indi-
cator light is on, turn the main
switch to “ON”. All of the turn sig-
nal lights flash twice and the vehi-
cle power turns on.
2. Push the main switch knob and
the smart key indicator light will
come on for approximately 4 sec-
onds.