Setting the auto power standby function
Enabling the auto power standby function prevents the unit from
remaining on when not in use. When the auto power standby function is
enabled, the unit automatically turns off in any of the following
situations.
• No operations for 8 hours
• No audio input and no operations for 10 minutes
This function is enabled by default.
1
Turn off the unit.
2
Touch and hold
y
and then touch and hold
z
on the
unit for at least five seconds.
The auto power standby function is enabled or disabled.
Once the indicator has shown the auto power standby
function setting applied to the unit as follows, the unit will
turn on.
Glows (disabled)
Off (enabled)
En
37
