Initializing the unit
Reset the settings of the unit to the factory presets.
1
Turn off the unit.
2
Touch and hold
}
and
z
on the unit until all
indicators except the Alexa indicator flash.
Flash (initialized)
Setting the dynamic range compression
Select the dynamic range compression level.
This function is set to “No compression” by default.
1
Turn off the unit.
2
Use the remote control to select the desired
compression level.
Compresssion
level
Function
Operations (buttons must
be pressed consecutively
within three seconds.)
Compression
(maximum)
Apply the maximum amount
of dynamic range
compression.
STEREO, VOLUME (+), and
then
z
Compression
(standard)
Apply the standard amount
of dynamic range
compression for normal
home use.
STEREO, VOLUME (-), and
then
z
No compression
Dynamic range compression
is not applied.
STEREO,
|
, and then
z
En
42
