NETWORKS
➤
Connecting to a network
En
33
8
Use the
S
/
T
keys to select the desired access point
and press the ENTER key.
The wireless connection setting screen appears on the TV.
9
Press the ENTER key.
10
Use the
W
/
X
/
S
/
T
and ENTER keys to enter the
security key.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that displayed
in step 8.
11
Use the
S
/
T
keys to select “Connect” and press
the ENTER key to start the connection process.
When a connection has been established, “Completed” will be
displayed on the TV screen.
If “Not connected” is displayed, press the ENTER key to repeat
the procedure beginning with step 6, or see the information
below to try another connection method.
NOTE
• “Access Point Scan” cannot be used to establish a wireless connection if
your wireless router (access point) is configured so that it does not
broadcast its SSID. See “Setting up the wireless connection manually” (p.
34) to establish a connection.
12
Press the SETUP key to exit the setup menu.
[
]/[
]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
SETUP
/
/
/
ENTER
