SETTINGS
➤
Configuring 4K video mode
En
51
When playing 4K video, select Mode 1 or Mode 2 according to the video signal format.
* When Mode 1 is selected, use a high-speed HDMI cable that supports bandwidth of
18 Gbps.
1
Turn off the unit.
2
Hold down the CONNECT key and press the
key on the unit.
The selected 4K video mode (Mode 1 or Mode 2) is enabled, and the unit turns on.
The indicator shows that Mode 1 or Mode 2 has been enabled for several seconds
immediately after the unit turns on.
Configuring 4K video mode
Mode 1*
4K (60 Hz/50 Hz) signals are input and output in 4:4:4, 4:2:2, or 4:2:0
format.
Depending upon the device connected or the HDMI cable used, video may
not be displayed correctly. Should this occur, select Mode 2.
Mode 2
(default)
4K (60 Hz/50 Hz) signals are input and output in 4:2:0 format.
CONNECT
Off (Mode 1), glows (Mode 2)