background image

SETTINGS

Updating the unit’s firmware

En

52

New firmware that provides additional features or product 
improvements will be released as needed. If the unit is connected to 
the Internet, you can download the firmware via the network and 
update it.

The unit’s firmware can be updated as follows.
• Update firmware from “Network Update” in the setup menu. To 

perform the procedure, your TV must be connected to the unit via 
HDMI.

• Update firmware using the dedicated MusicCast CONTROLLER 

app installed on a mobile device. Follow MusicCast 
CONTROLLER guides to operate the app and update the 
firmware.

Using “Network Update” in the setup 
menu to update firmware

When the unit is turned on for the first time after a new version of the 
unit’s firmware has been released, a message indicating that a 
firmware update is available will be displayed on the TV screen.

HINT

• To update the firmware later, press the RETURN key when the “Network Update” 

screen is displayed on the TV screen.

1

Press the SETUP key.

2

Use the 

S

/

T

 keys to select “Network”, and then 

press the ENTER key.

3

Use the 

S

/

T

 keys to select “Network Update”, and 

then press the ENTER key.

4

Press the ENTER key.

The TV screen goes black and firmware update begins.
Update progress can be confirmed using the indicators on the 
unit.

If the update is completed successfully, all indicators on the 
unit will flash.

5

Press the 

 key on the unit.

The firmware update is complete.

NOTE

• If the firmware update fails, the indicator at far right on the unit will flash blue. 

Press the 

 key to turn unit off and then on again, and repeat the procedure from 

step 1 again. If the update fails again, check the network connection.

Updating the unit’s firmware

Cautions

• Do not operate the unit or disconnect the power cable or network cable during 

firmware update.

• If the Internet connection speed is slow, or the unit is connected to the wireless 

network, network update may not be possible depending on the condition of the 
network connection. Should this occur, try again at a later time.

• For details on update, visit the Yamaha website.

Network Update

New firmware available.

You can start the update from

the “Setup Menu” .

It takes about 20 min. to 

update firmware.

   [SETUP] : Setup Menu

[RETURN] : Cancel

Update progress

CONNECT

SETUP

RETURN

/

ENTER

Summary of Contents for YAS-706 Series




































































Reviews: