8
En
Operations
Preparing the remote control
Peel off the protection sheet before use.
Operating range of the remote control
Remain within the operating range shown below.
Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
Remote control sensor
Within 6 m
(20 ft)
Input keys
Select an input source to be played back.
TV
....................TV audio
BD/DVD
...........Audio from a device connected to
the BD/DVD input jack
COAXIAL
.........Audio from a device connected to
the COAXIAL input jack
ANALOG
.........Audio from a device connected to
the ANALOG input jack
BLUETOOTH (YAS-103 only)
.........................Audio from a
Bluetooth
connected
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV’s input
source to the playback device.
• For details on
Bluetooth
connection, refer to “Listening to the
device (YAS-103 only)” (p.10).
SUBWOOFER keys (+/-)
Adjust the volume of the subwoofer.
VOLUME keys (+/-)
Adjust the volume of the sound bar.
Volume down (–)
Volume up (+)
Volume down (–)
Volume up (+)
1
2
LEARN key
★
Sets the sound bar to the TV’s remote control
learning mode (p.12).
REPEATER key
★
Enables/disables the TV Remote Repeater
function (p.14).
3
Remote control signal transmitter
Transmits infrared signals.
★
: the BLUETOOTH
STANDBY, AUDIO
DELAY, LEARN, and
REPEATER keys
require 3-second press.
★
★
★
