8
En
Operations
Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
In this manual, illustrations of the nine in-line indicators
are used for explanation.
: Off
: Lights up
: Flashes
(Example: When the STATUS indicator flashes and the TV indicator
lights up)
Input keys
Select an input source to be played back.
TV
....................TV audio
BD/DVD
...........Audio from a device connected to
the BD/DVD input jack
ANALOG
.........Audio from a device connected to
the ANALOG input jack
BLUETOOTH
...Audio from a
Bluetooth
connected
device
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV’s input
source to the playback device.
• For details on
Bluetooth
connection, refer to “Listening to the
SUBWOOFER keys (+/–)
Adjust the volume of the subwoofer.
VOLUME keys (+/–)
Adjust the volume of the sound bar.
Volume down (–)
Volume up (+)
Volume down (–)
Volume up (+)
1
2
LEARN key
★
Sets the sound bar to the TV’s remote control
learning mode (p.12).
REPEATER key
★
Enables/disables the TV Remote Repeater
function (p.14).
3
Remote control signal transmitter
Transmits infrared signals.
★
: Keys that require pressing for more than 3 seconds
BLUETOOTH STANDBY, SUBWOOFER PAIRING,
AUDIO DELAY, LEARN, REPEATER
★
★
★
