9
En
(power) key
Turns on or off (standby) the sound bar.
The STATUS indicator on the sound bar
The STATUS indicator on the subwoofer
BLUETOOTH STANDBY key
★
Enables/disables the
Bluetooth
standby mode
SUBWOOFER PAIRING key
★
Performs pairing between the sound bar and
subwoofer (p.19).
Green (turned on)
Red (
Bluetooth
Off (turned off)
Green (turned on)
Red (turned off)
SURROUND and STEREO keys
Switch between surround and stereo
(2 channel) playback. When surround playback is
selected, you can enjoy a realistic sound effect
using Yamaha’s exclusive AIR SURROUND
XTREME.
HINT
• When 2 channel stereo signals are played in surround,
the
PLII indicator lights up.
Lights up (surround playback)
Off (stereo playback)
SURROUND
STEREO
Lights up (Dolby Pro Logic II)
4
5
BASS EXTENSION key
Enables/disables the bass extension function.
When this function is enabled, you can enjoy
powerful sound during surround playback through
Yamaha’s exclusive bass boost technology.
Flash 3 times (enabled), flash once (disabled)
MUTE key
Mutes the audio output. Press the key again
to unmute.
Flash (on mute)
7
6
CLEAR VOICE key
Enables/disables the clear voice function.
When this function is enabled, you can enjoy clear
voice sounds while watching movies, TV dramas,
news programs or sports programs.
UNIVOLUME key
Enables/disables the UniVolume function.
When this function is enabled, consistent volume is
maintained when inputs or sound sources switch.
HINT
• The UniVolume function is automatically disabled when
BLUETOOTH is selected as the input source.
AUDIO DELAY key
★
Adjusts the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio delay.
1 Hold down the AUDIO DELAY key for more
than 3 seconds.
The left most indicator flashes.
2 Press the SUBWOOFER (+/–) key to adjust
the audio delay.
Pressing the SUBWOOFER (+) key delays the
audio output timing.
3 To finish the adjustment, press the AUDIO
DELAY key.
HINT
• The adjustment will be finished automatically if no
operations are performed for 20 seconds.
Flash 3 times (enabled), flash once (disabled)
Flash 3 times (enabled), flash once (disabled)
(–)
(+)
Decoder indication
The sound bar supports the following audio signals. You
can check the type of the input audio signal by the color
of the indicator.
Green (Dolby Digital), Red (DTS Digital Surround)
Off (PCM)
