PLAYBACK
➤
Operations
En
15
PLAYBACK
Operations
2
Remote control signal transmitter
Transmits infrared signals.
(power) key
Turns on or off the unit.
Turned on
Turned off (when the HDMI control function
(p. 46 in the Owner’s Manual) or network
standby function (p. 49 in the Owner’s Manual)
is enabled)
Turned off
The indicator for the last input
source selected glows.
Indicates the surround setting, and network (p.
19) or
Bluetooth
(p. 24 in the Owner’s Manual)
connection status.
Glows (red)
1
Input keys
Select an input source to be played back.
TV
.............................TV audio or sound from a device
connected to the unit’s TV input
jack
HDMI 1, HDMI 2
.......Sound from a device connected
to the HDMI IN 1 or HDMI IN 2
jack
COAXIAL
.................Sound from a device connected
to the COAXIAL input jack
ANALOG
..................Sound from a device connected
to the ANALOG input jacks
BLUETOOTH
...........Sound from a
Bluetooth
connected device
NET
..........................Audio acquired via a network
The last audio source listened to
is selected when the NET key is
pressed.
The indicator for the selected input source glows.
(Example: when TV is selected)
HINT
• To play sound from the device connected to the TV or to
watch video from the device, set the TV’s input source to the
playback device.
• For playback from a
Bluetooth
device, refer to page 24 in the
Owner’s Manual. For audio playback via a network, refer to
pages 39 to 42 in the Owner’s Manual.
TV
HDMI1
HDMI2
COAXIAL
BLUETOOTH
NET
ANALOG
HDMI 1 (green)
HDMI 2 (red)
BLUETOOTH (green)
NET (red)
2
