ELEC
CHECKING THE BULBS AND BULB SOCKETS
CHECKING THE BULBS AND BULB
SOCKETS
Check each bulb and bulb socket for damage or
wear, proper connections, and also for continuity
between the terminals.
Damage/wear
-->
Repair or replace the bulb,
bulb socket or both.
Improperly connected
-->
Properly connect.
No continuity
-->
Repair or replace the bulb,
bulb socket or both.
TYPES OF BULBS
The bulbs used on this vehicle are shown in the
illustration on the left.
•
Bulbs
A
and
B
are used for the headlights and
usually use a bulb holder that must be detached
before removing the bulb. The majority of these
types of bulbs can be removed from their
respective socket by turning them
counterclockwise.
•
Bulb
C
is used for turn signal and tail/brake lights
and can be removed from the socket by pushing
and turning the bulb counterclockwise.
•
Bulbs
D
and
E
are used for meter and indicator
lights and can be removed from their respective
socket by carefully pulling them out.
7-5
Summary of Contents for YBR250 2007
Page 1: ...YBR250 SERVICE MANUAL 5D1 F8197 E0 2007 ...
Page 2: ......
Page 359: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...
