CHK
ADJ
FUEL TANK
INSTALLING THE FUEL PUMP
1. Install:
•
fuel pump
INSTALLING THE FUEL HOSE
1. Install:
•
fuel hose (fuel pump side)
Fuel pump screw
4 N.m (0.4 kgf.m, 2.9 ft.lb)
3-6
•
Do not damage the installation surfaces of the
fuel tank when installing the fuel pump.
•
Always use
a
new fuel pump gasket.
•
Align the a projection in the fuel pump with the
groove at the bracket.
•
Tighten the fuel pump bolts in stages in
a
crisscross pattern and to the specified torque.
•
Install the fuel pump as shown in the illustration.
NOTE:
When installing the fuel hose, make sure that it
is securely connected, and that the fuel hose
connector cover on the fuel hose is in the
correct position, otherwise the fuel hose will not
be properly installed.
CAUTION:
•
Install the fuel hose securely onto the fuel pump
until a distinct “click” is heard.
•
To install the fuel hose onto the fuel pump, slide
the fuel hose connector cover
1
on the end of
the hose in the direction of the arrow shown.
NOTE:
FRONT
1
2
3
4
5
6
a
Summary of Contents for YBR250 2007
Page 1: ...YBR250 SERVICE MANUAL 5D1 F8197 E0 2007 ...
Page 2: ......
Page 359: ...YAMAHA MOTOR DA AMAZÔNIA LTDA ...
