YDP-131/YDP-131C
15
23.
GHL (GHS) 鍵盤Ass yの分解
[270B]
A-1 Key
(A-1鍵)
B-1 Key
(B-1鍵)
One octave
(1オクターブ)
(C0–B0)
[270A]
[270A]
[270A]
[270A]
[270A]
[270A]
[270A]
[270C]
C7 Key
(C7鍵)
One octave
(1オクターブ)
(C1–B1)
One octave
(1オクターブ)
(C2–B2)
One octave
(1オクターブ)
(C3–B3)
One octave
(1オクターブ)
(C4–B4)
One octave
(1オクターブ)
(C5–B5)
One octave
(1オクターブ)
(C6–B6)
[270]: Bind Head Tapping Screw-P
(Pタイト+BIND)
3.0x16 MFZN2W3 (WF973000)
Fig. 20
(図20)
Grease
(グリス)
Rubber contact
(接点ゴム)
GHL88M
End lug of white key
(白鍵の爪)
Fig. 21
(図21)
<Top view>
Fig. 22
(図22)
Actuate rubber
(駆動ラバー)
Remove in this way.
(取り出す)
23-1
白鍵Ass y、
黒鍵Ass y
各オクターブ
(C〜B)
の白鍵Ass yと黒鍵Ass yを止
めている[270A]のネジ4本を外し、
白鍵のツメを後方
に押しながら1オクターブ分の白鍵Ass y/黒鍵
Ass yを外します。
このとき、
白鍵Ass y/黒鍵Ass y
の後部を持ち上げてから、
手前にスライドさせて取
り外してください。
(図20、
図21)
23-2
A-1, B-1鍵は、
[270B]のネジ2本を外し、
A-1, B-1鍵の後
方を持ち上げてから、
手前にスライドさせて取り外
します。
(図20)
23-3
C7鍵は、
[270C]のネジ1本を外し、
C7鍵の後方を持ち
上げてから、手前にスライドさせて取り外します。
(図20)
注)
白鍵Ass y、
黒鍵Ass yの取り外しの際、
グリスが基
板や接点ゴム等に付かないように注意してくださ
い。
(図21)
23‐4
駆動ラバー
白鍵(黒鍵)
の駆動ラバーを外します。
(図22)
23.
Disassembling the Keyboard Assembly
23-1
White key assembly and black key assembly
Remove the four (4) screws marked [270A] fixing the
black and white key assembly for one octave (C–B).
To remove the back of the black and white key
assembly of each octave, while pushing the end lug of
white keys rearward and lifting the back of keys, slide
the black and white key assembly towards you.
(Fig.20, Fig.21)
23-2
When removing white keys numbered as A-1 and B-1
key and black key, remove two (2) screws marked
[270B] and then lift the back of the keys and slide the
black and white keys towards you. (Fig. 20)
23-3
When removing the C7 key, remove a screw marked
[270C] and then lift the back of C7 key and slide it
towards you. (Fig. 20)
Note: When removing white key assembly and black key
assembly, be careful not to allow grease to attach to
the circuit board and rubber contacts, etc. (Fig. 21)
23-4
Actuate Rubber
Remove the actuate rubber. (Fig. 22)