– 24 –
CHAS
FRONT BRAKE
5.Remove:
●
Brake pads
1
(with pad shim
2
)
●
Pad spring
3
NOTE:
●
When pad replacement is required, also
replace the pad spring and shim.
●
Replace the pads as a set if either is found to
be worn to the wear limit
a
.
Wear limit
a
:
1.0 mm (0.04 in)
1
2
3
6.Install:
●
Pad shim
(onto inside brake pad)
●
Pad spring
●
Brake pads
*********************************************
Installation steps:
●
Connect a suitable hose
1
tightly to the cali-
per bleed screw
2
. Then, place the other
end of this hose into an open container.
●
Loosen the caliper bleed screw and push the
pistons into the caliper with the finger.
●
Tighten the caliper bleed screw
2
.
●
Install the pad shim
3
(new) onto the brake
pad (new).
NOTE:
The arrow mark
a
on the pad shim must point
in the direction of the disc rotation.
●
Install the pad spring (new) and brake pads
(new).
*********************************************
T
R
.
.
Caliper bleed screw:
6 Nm (0.6 m • kg, 4.3 ft • lb)
