– 26 –
CHAS
FRONT BRAKE
4.Remove:
●
Union bolt
1
●
Copper washers
2
●
Brake hose
3
NOTE:
Place the open end of the hose into a con-
tainer and pump the oil fluid out carefully.
5.Remove:
●
Caliper body
1
●
Caliper bracket
2
NOTE:
Before removing the caliper body from the
bracket, disconnect the dust boot from the
guide shaft on the bracket.
1
2
6.Remove:
●
Piston
●
Piston seals
1
*********************************************
Removal steps:
●
Blow compressed air into the hose joint
opening to force out the caliper piston from
the caliper body.
●
Remove the piston seals.
WARNING
Never try to pry out the piston.
*********************************************
MASTER CYLINDER DISASSEMBLY
NOTE:
Before disassembling the front brake master
cylinder, drain the brake hose, master cylinder,
brake caliper and reservoir tank of their brake
fluid.
