8-32
8
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive chain with a
special O-ring chain lubricant. NOTICE: Do
not use engine oil or any other lubricants
for the drive chain, as they may contain
substances that could damage the O-
rings.
[ECB00581]
EBU24902
Checking and lubricating the cables
The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.
WARNING
EWB02581
●
Inspect cables frequently and replace if dam-
aged. Corrosion can result when the cable
sheaths become damaged, and cables can
also become frayed or kinked, which could
restrict the operation of controls and lead to
an accident or injury.
●
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.
1. O-ring
1
1
Recommended lubricant:
Yamaha Chain and Cable Lube or engine oil
U1BS62E0.book Page 32 Monday, April 18, 2011 6:43 PM
Summary of Contents for YFM350RB
Page 12: ...1 2 1 4D3 2816L 20 43P 2816R 01 1 2 U1BS62E0 book Page 2 Monday April 18 2011 6 43 PM ...
Page 17: ...1 7 1 For Oceania 1 3 2 4 5 6 U1BS62E0 book Page 7 Monday April 18 2011 6 43 PM ...
Page 58: ...7 1 7 EBU21141 RIDING YOUR ATV U1BS62E0 book Page 1 Monday April 18 2011 6 43 PM ...
Page 139: ...U1BS62E0 book Page 3 Monday April 18 2011 6 43 PM ...