10
FWD
UP
SYMBOLS USED IN
ASSEMBLY MANUAL
In order to simplify descriptions in assembly manuals,
the following symbols are used:
: Coat with lithium soap base grease.
: Tighten to 10 Nm.
(10 Nm = 1.0 m • kg, 7.2 ft • lb)
: Front ward of the machine.
: Provide a clearance.
: Install so that the arrow mark faces upward.
: Apply a motor oil.
: Made of rubber or plastics.
A:
Ref. No. (indicating the order or operations.)
B:
Part name
C:
Quantity of parts per machine.
D:
Place where parts are held.
1
: Refer to “PARTS LOCATION”.
V:
Stored in vinyl bag.
C:
Stored in carton box.
S:
Fixed inside the steel frame and/or contained in
the styrofoam tray (upper or lower).
*
:
Temporarily installed or secured.
Example:
1
- V
1
signifies the location of the parts and V signifies
that the part is stored in a vinyl bag.
E:
Size or material of parts.
d/D: Diameter of part.
r
: Length of part.
ex, 5 (0.2) = 5 mm (0.2 in)
