8-25
The rear brake pads must be checked for wear at the
intervals specified in the periodic maintenance and
lubrication chart. Each brake pad is provided with
wear indicator grooves, which allow you to check the
brake pad wear without having to disassemble the
brake. If a brake pad has worn to the point that the
wear indicator grooves have almost disappeared,
have a Yamaha dealer replace the brake pads as a
set.
Checking the rear brake pads
Insufficient brake fluid may allow air to enter the brake
system, possibly causing it to become ineffective.
Before riding, check that the brake fluid is above the
minimum level mark and replenish if necessary.
A low brake fluid level may indicate worn brake pads
and/or brake system leakage. If the brake fluid level
is low, be sure to check the brake pads for wear and
the brake system for leakage.
Checking the brake fluid level
1. Wear indicator groove
8
1
After servicing:
Make sure the brakes operate smoothly and
that the free play is correct.
Make sure the brakes do not drag.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
