Yamaha YHT-31, Quick Connect Manual

YHT-31 Q

U I C K

- C

O N N E C T

G

U I D E

5

C

ONNECTING

 A 5.1-C

HANNEL

 D

ECODER

If you own a 5.1-channel decoder (or a unit which
incorporates a 5.1-channel decoder), you can connect
its discrete outputs to the R-V703 as shown below.

• To hear playback of a stereo or mono audio source

or one encoded with Dolby Pro Logic Surround*,
connect the unit (e.g., DVD player) to the DVD/LD
(or TV/DBS) AUDIO SIGNAL input terminals.

• The discrete signals feeding to the R-V703 cannot be

recorded by a tape deck, MD recorder, or VCR. To

record programs from a source (e.g., laserdisc
player), connect the source unit to the DVD/LD (or
TV/DBS) AUDIO SIGNAL input terminals.

• If your audio system does not include a subwoofer

(i.e., SUBWOOFER input terminals are not used), set
signal routing on the 5.1- Channel Decoder so that
the LFE channel feeds both LEFT and RIGHT MAIN
output terminals. For details, refer to the owner's
manual for your 5.1-Channel Decoder unit.

*Dolby Pro Logic Surround is a trademark of Dolby Laboratories Licensing Corp.

Yamaha  R-V703 Receiver Rear Panel

R

L

V

DVD/LD

R

MAIN

DVD/LD
TV/DBS

SUR

6CH

DISCRETE

INPUT

L

R

L

C SUB

RCA Cable Color Codes

Yellow = Video

White = Left Audio

Red = Right Audio

Use an RCA Video Cable And Jacks For Video Interconnections

Digital Audio Cable
(Optical or Coaxial)

DVD Player

 Audio L Out

Audio R Out 

L Main Out

R Main Out

L Sur Out

Sub Out

Center Out

R Sur Out

Video Out

5.1-Channel Decoder