5-6
Periodic maintenance
6.
Place a suitable container below the engine oil
drain bolt to collect the used oil.
7.
Drain the engine oil completely by removing the
engine oil filler cap, the engine oil drain bolt, and its
gasket.
8.
Install the engine oil drain bolt and its new gasket,
and then tighten the bolt to the specified torque.
9.
Refill new engine oil up to the brim of the oil filler
hole.
TIP
If the engine oil spills, wipe it up immediately using dry
rags.
10.
Install and tighten the engine oil filler cap securely.
11.
Install the engine oil drain cover by installing the
bolts.
12.
Install the right side cover to the original position
by inserting the projections into the rubber grom-
mets of the body, and then install the bolts and
tighten them to the specified torque.
1
2
3
1. Engine oil filler cap
2. Engine oil drain bolt
3. Engine oil drain bolt gasket
Tightening torque:
Engine oil drain bolt:
23 N·m (2.3 kgf·m)
1
1. Correct engine oil level
Engine oil quantity:
1.0 L
Recommended engine oil:
7XE-28199-U6-E0.book 6 ページ ２０２０年５月１日 金曜日 午後３時４３分
