background image

50 

En

DAB (Digital Audio Broadcasting)

The DISPLAY key shows various information about the 
service currently being broadcast.

y

A letter that cannot be displayed in the front panel display is 
displayed as “_” (underscore).

Up to 16 characters can be displayed in the front panel display at 
one time. If there are more than 16 characters in the data text, the 
information being displayed continuously scrolls from left to 
right, one letter at a time.

1

While a service is currently being broadcast, 
press DISPLAY.

Each time you press DISPLAY, information about the 
service being broadcast is displayed in the OSD and 
front panel.
The service information is displayed in the following 
order:

The information order starts from the beginning again 
after the information on signal quality has been 
displayed.

y

You can set the time for which the DAB service information 
is displayed on the video monitor by using the “OSD 
DISPLAY TIME” on page 87.

Descriptions of the information types are listed 
below:

Service label

Displays the name of the current service (maximum 
16 letters).

DLS (Dynamic Label Segment)

Displays information about the program currently 
being broadcast. The current song or program title, 
artist or speaker, or even what the next song or 
program will be may be displayed. This data is 
continuously updated by the DAB broadcaster, thus it 
often changes (with every new song or program).
Other data, such as news, weather, and sports 
headlines may be broadcast as well.

Ensemble label

Displays the name of the current ensemble 
(maximum letters).

Program type

Displays the genre (song/program type) of the current 
service (maximum 16 characters).

Date and time

Displays the current date and time. This data is 
updated with each passing minute.

Audio mode/bit rate

Displays the audio mode and bit rate of the current 
service. There are 3 types of audio modes: Mono, 
Stereo, and Dual. The range of bitrates is from 32 
kbps to 256 kbps.

Channel label/frequency

Displays the channel label and frequency of the 
current service.

Signal quality

Displays the signal strength (from 00 to 100) of the 
current service. A higher number means better 
reception.

DAB service information

Note

Order

Information type

Example

1

Service label

Classic FM

2

DLS

Classic FM on 
the internet...

3

Ensemble label

Digital1 Network

4

Program type

Classic Music

5

Date and time

01 JUL 07 10:30

6

Audio mode / bit rate

Stereo 160Kbps

7

Channel label /
frequency

11D / 222.06MHz

8

Signal quality

SIGNAL Q:100

          

ALPHANUMERIC

SERVICE:Classic FM
PROGRAM:Classic Music
DLS

:(Classic FM on t)

DISPLAY MODE
SERVICE:Classic FM

[ ]/[ ]:SERVICE

DAB INFORMATION

p

p

DISPLAY

01EN_YSP-30D_B.book  Page 50  Monday, October 29, 2007  10:31 AM

Black process 45.0° 240.0 LPI 

Summary of Contents for YSP-30D



























































































































Reviews: