10
En
b
Connections
Connecting the power cable
After all the connections are complete, plug in the power cable.
Turning on the unit
1
Press the
z
key.
When the unit is turned on for the first time after purchase,
the screen below will be displayed on the TV. (“ViewScreen”
is shown in the front panel display.)
• When the screen is not displayed, use the input button on the TV’s remote control
to switch input so that video input from this unit is displayed. When this unit is
connected to the TV as shown on page 8, select “HDMI 1”.
• The language used for menu display (OSD Language) can be selected from the
screen shown above. Use the
W
/
X
key to select the language, and follow the
on-screen instructions. The OSD language can also be changed from the setup
menu at any time. Press and hold the SETUP (
) key until the “OSD Language”
menu is displayed on the TV, and use the
S
/
T
key to select the language. Press
the SETUP (
) key to exit the setup menu.
While this screen is displayed, an iOS device (such as an iPhone)
can be used to easily connect the unit to a wireless network. Follow
the procedure below.
If you will not use an iOS device to connect to a wireless network,
press the RETURN (
) key and proceed to “
appropriate surround effects (IntelliBeam)”.
• This screen will not be displayed if the unit is connected to a router via its
NETWORK jack (wired connection).
• See page 51 in the Owner’s Manual for wireless network connection methods
other than “Share Wi-Fi Settings”, or for more information regarding wired and
wireless networks.
1
Press the ENTER key.
The screen below is displayed.
• You need iOS device with iOS 7.1 or later.
• Before proceeding, confirm that your iOS device is connected to a wireless
router (access point).
SYSTEM
CONNCETOR
R
L
AUX1
AUX2
TV
OPTICAL
IN 4
OUT
(ARC)
HDMI
IR-IN
SUBWOOFER
OUT
AC IN
The unit (rear)
To an AC wall outlet
S h a r e W i - F i S e t t i n g s
Y o u c a n s h a r e t h e w i r e l e s s
( W i - F i ) s e t t i n g s o f t h e
n e t w o r k w i t h S o u n d P r o j e c t o r
u s i n g a d e v i c e w i t h i O S 7 o r
l a t e r .
[ E N T E R ] : S t a r t
[ R E T U R N ] : C a n c e l
[ ] : O S D L a n g u a g e
Connecting the unit to a wireless network
S h a r e W i - F i S e t t i n g s
M a k e s u r e y o u r i O S d e v i c e i s
c o n n e c t e d t o y o u r W i - F i
n e t w o r k , a n d t h e n o p e n t h e
W i - F i s e t t i n g s s c r e e n o f
y o u r i O S d e v i c e .
[ E N T E R ] : C o n f i r m
[ R E T U R N ] : C a n c e l
1 2 3 4
RETURN ( )
z
ENTER
S
ETUP ( )
