4
Using the subwoofer
1
Power indicator
Lights up in GREEN when the
POWER
switch
(
2
) is turned
ON
; turns off when the
POWER
switch is turned OFF.
2
POWER switch
Press this switch to the
ON
position to turn on
the power to the subwoofer. When the power of
the subwoofer is on, the power indicator (
1
) on
the rear panel lights up in green. Press this
switch again to set it to the
OFF
position to turn
off the power of the subwoofer.
3
VOLUME control
Adjusts the volume level. Turn the control
clockwise to increase the volume, and counter-
clockwise to decrease the volume.
4
INPUT terminal
Input terminal for line level signals from the
amplifier.
Pre-adjusting the subwoofer
volume
Before you use the subwoofer, first adjust the vol-
ume balance between the subwoofer and the front
speakers by following the procedure below.
1.
Set the
VOLUME
control to minimum (0).
2.
Turn on the power to all other components.
3.
Press the
POWER
switch to the
ON
position.
The power indicator on the rear panel lights up
in green.
4.
Play a source that contains bass signal. Adjust
the amplifier’s volume control to the desired lis-
tening level.
5.
Rotate the
VOLUME
control gradually to
adjust the volume balance between the sub-
woofer and the other speakers. To enjoy natural
bass sound, keep the subwoofer volume at a
level where it is barely distinguishable from
other speakers.
6.
Adjust the volume of the entire sound system
using the amplifier’s volume control.
Note:
It is recommended to set the
VOLUME
control about in the middle
position when using in a multi channel
home theater system.
POWER
VOLUME
INPUT
ON
OFF
3
1
4
2
INPUT
VOLUME
OFF
ON
POWER
Subwoofer rear panel
VOLUME
