background image

– 30 –

OPERATION

STARTING THE ENGINE (FOR 

ELECTRIC START)

WARNING

Never operate the engine in a closed 
area. Exhaust fumes contain harmful 
chemicals such as carbon monoxide. 
Operating the engine in poor ventilated 
area or indoor could cause the carbon 
monoxide poisonous.

1. Move the shift lever to the “N” (Neutral) 

position, and make sure that both auger 
clutch lever and drive clutch lever are 
releasing.

1

2

1.  Shift lever
2.  “N” (Neutral)

2

1

1.  Auger clutch lever
2.  Drive clutch lever

2. Turn the fuel cock lever from the “OFF” 

position to the “ON” position.

1

2

3

1. “ON”
2. “OFF”
3.  Fuel cock lever

3. Move the throttle/choke lever from the 

“SLOW 

” position to the “START 

1

” 

position.

TIP

If the engine is already warmed up, it is not 
necessary to move the throttle/choke lever 
to the “START 

1

” position.

1

2

3

1.  Throttle/Choke lever
2. “START 

1

3. “SLOW  ”

4. Start the engine by turning the engine 

switch key to the “START 

6

” position.

  When the engine has started, release 

7T0-28199-70-E0.indd   30

2019/05/01   9:22:58

Summary of Contents for YT624













































































Reviews: