– 38 –
OPERATION
STOPPING THE
SNOWBLOWER
1. Release the auger clutch lever and
drive clutch lever.
1
2
1. Auger clutch lever
2. Drive clutch lever
2. Move the shift lever to the “N” (Neutral)
position.
1
2
1. Shift lever
2. “N” (Neutral)
3. Hold the auger clutch lever.
TIP
After clearing snow, hold the auger clutch
lever to clear the snow on the auger and
impeller. Leaving snow on the auger and
impeller could cause freeze and damage.
1
1. Auger clutch lever
4. Release the auger clutch lever.
1
1. Auger clutch lever
5. Move the throttle/choke lever to the
“SLOW
” position. Turn the engine
switch key to the “STOP
5
” position to
stop the engine, and then turn the fuel
cock lever to the “OFF” position.
7T0-28199-70-E0.indd 38
2019/05/01 9:23:00