8-16
8
6. If the oil level is not between the tip of the
dipstick and the maximum level mark,
add sufficient oil of the recommended
type to raise it to the correct level.
7. Install the engine oil tank filler cap.
8. Install the panel.
To change the engine oil
1. Park the vehicle on a level surface.
2. Remove panel C. (See page 8-10.)
3. Remove the engine oil tank cover by re-
moving the bolts.
4. Start the engine, warm it up for several
minutes, and then turn it off.
5. Place an oil pan (or use a trough or funnel)
beneath the oil tank to collect the used
engine oil.
6. Remove the engine oil tank filler cap and
the cylinder head cap.
1. Engine oil tank filler cap
2. Engine oil dipstick
3. Maximum level mark
4. Tip of the engine oil dipstick
1
3
4
2
1. Engine oil tank cover
2. Bolt
1
2
U2HC70E0.book Page 16 Monday, August 17, 2015 11:59 AM
