8-19
8
TIP
Be sure to wipe off spilled oil on any parts af-
ter the engine and exhaust system have
cooled down.
NOTICE
ECB03020
Do not use oils with a diesel specifica-
tion of “CD” or oils of a higher quality
than specified. In addition, do not use
oils labeled “ENERGY CONSERVING II”
or higher.
Make sure that no foreign material en-
ters the oil tank.
14. Install and tighten the engine oil tank filler
cap.
15. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
16. Turn the engine off, wait at least ten min-
utes, and then check the oil level and cor-
rect it if necessary.
17. Install the engine oil tank cover by install-
ing the bolts.
18. Install the panel.
To change the engine oil and oil filter
1. Park the vehicle on a level surface.
2. Remove the bolts from the left and right
side panels.
Recommended engine oil:
Oil quantity:
Oil change only:
2.50 L (2.64 US qt, 2.20 Imp.qt)
Oil change and filter replacement:
2.70 L (2.85 US qt, 2.38 Imp.qt)
U2HC70E0.book Page 19 Monday, August 17, 2015 11:59 AM
