4-29
4
NOTICE
ECB00091
Never turn an adjusting mechanism be-
yond the minimum and maximum settings.
TIP
Although the total number of clicks or turns of
a damping force adjusting mechanism may
not exactly match the following specifications
due to small differences in production, the ac-
tual number of clicks or turns always repre-
sents the entire adjusting range. To obtain a
precise adjustment, it would be advisable to
check the number of clicks or turns of each
damping force adjusting mechanism and to
modify the specifications as necessary.
Spring preload
1. Loosen the locknut.
2. Turn the spring preload adjusting nut in
direction (a) to increase the spring pre-
load and thereby harden the suspension,
and in direction (b) to decrease the spring
preload and thereby soften the suspen-
sion.
TIP
A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
1. Locknut
2. Special wrench
3. Spring preload adjusting nut
2
1
3
(a)
(b)
U2HC70E0.book Page 29 Monday, August 17, 2015 11:59 AM
