4-30
4
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The shorter distance A is, the higher
the spring preload; the longer distance A is,
the lower the spring preload.
3. Tighten the locknut to the specified
torque.
NOTICE:
Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Spring preload setting:
Minimum (soft):
Distance A = 428.2 mm (16.86 in)
Standard:
Distance A = 415.5 mm (16.36 in)
Maximum (hard):
Distance A = 402.8 mm (15.86 in)
1. Distance A
Tightening torque:
Locknut:
41 Nm (4.1 m·kgf, 30 ft·lbf)
1
U2HC70E0.book Page 30 Monday, August 17, 2015 11:59 AM
