6-7
6
working properly after a crash, have them in-
spected and any necessary replacements
made as soon as possible.
EBU31810
Passenger handhold
Check that the handhold bar and its supports
are in good condition. Confirm that the lock-
ing pins are securely fastened, and then push
and pull on the handhold to make sure that it
is not loose.
EBU31820
Steering
Park on level ground. Turn the steering wheel
right and left. Check for excessive free play,
abnormal noises, or a rough feeling. Have a
Yamaha dealer repair as necessary for proper
operation.
EBU36691
Drive select lever and shift paddles
The drive select lever and shift paddles
should move smoothly and return to their
original position.
EBU36672
YCC-S clutch
Check the YCC-S clutch fluid level and cor-
rect if necessary. (See page 9-47.)
Check the operation of the drive select lever
and shift paddles at the start of each drive.
TIP
If the YCC-S clutch fluid level was low, be
sure to check the clutch system for leak-
age.
If any leakage is found, or if shifting is not
smooth, have a Yamaha dealer service the
vehicle.
EBU35700
Fittings and fasteners
Always check the tightness of chassis and
wheel fittings and fasteners before starting
off. Take the vehicle to a Yamaha dealer or re-
fer to the Service Manual for correct tighten-
ing torque.
UBAS12E0.book Page 7 Monday, November 29, 2021 10:56 AM
