8-32
8
3. If the level is low, add sufficient oil of the
recommended type to raise it to the
specified level.
NOTICE:
Be sure no for-
eign material enters the differential
gear case.
[ECB00412]
4. Check the gasket for damage, and re-
place it if necessary.
5. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Changing the differential gear oil
1. Park the vehicle on a level surface.
2. Place an oil pan under the differential
gear case to collect the used oil.
3. Remove the differential gear oil filler bolt,
the differential gear oil drain bolt and their
gasket to drain the oil.
1. Differential gear oil filler bolt
2. Gasket
3. Differential gear oil
4. Correct oil level
1
2
3
4
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
1. Differential gear oil drain bolt
2. Gasket
1
2
UB577AE0.book Page 32 Wednesday, June 8, 2016 9:35 AM
Summary of Contents for YXZ10YEXH
Page 12: ...1 3 1 23 22 20 21 18 19 17 UB577AE0 book Page 3 Wednesday June 8 2016 9 35 AM...
Page 22: ...1 13 1 For Oceania 1 2 3 4 1 1 7 3 6 1 5 8 UB577AE0 book Page 13 Wednesday June 8 2016 9 35 AM...
Page 23: ...1 14 1 10 9 11 UB577AE0 book Page 14 Wednesday June 8 2016 9 35 AM...
Page 214: ...11 2 11 1 Model label 1 UB577AE0 book Page 2 Wednesday June 8 2016 9 35 AM...