4-36
ENG
CLUTCH AND PRIMARY DRIVEN GEAR
EC495121
Push lever
1. Install:
9
Torsion spring
1
9
Push lever
2
To push lever axle
3
.
NOTE:
9
Install the push lever with its
5
mark
a
downward.
9
Temporarily install the torsion spring and push
lever at this point.
2. Check:
9
Push lever position
NOTE:
When pushing the push lever forward, the front
line
b
should be within the range
a
. If not, rein-
stall the push lever.
3. Adjust:
9
Push lever position
10. Install:
9
Clutch cover
1
9
Bolt (clutch cover)
2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
10 Nm (1.0 m•kg, 7.2 ft•lb)
Adjustment steps:
9
Remove the push lever
1
from the push
lever axle
2
.
9
Re-install the push lever so that the projec-
tion is positioned between alignment marks
when pushing the push lever forward.
9. Install:
9
Gasket (clutch cover)
1
NOTE:
Position the rack
a
on the push rod backward.
5NY-9-30-4B 5/23/01 8:48 PM Page 38
Summary of Contents for YZ125(P)/LC
Page 128: ...3 3 INSP ADJ MEMO...
Page 286: ...4 37 ENG CLUTCH AND PRIMARY DRIVEN GEAR 4 Install 9Plain washer 1 9Circlip 2...
Page 562: ...TUN MEMO...
Page 563: ......
