2-17
SPEC
CABLE ROUTING DIAGRAM
A
Install the brake hose so that its pipe portion
directs as shown and lightly touches the projec-
tion on the master cylinder.
B
Pass the “ENGINE STOP” button lead in the
middle of the clutch holder.
C
Clamp the “ENGINE STOP” button lead to the
handlebar.
D
Pass the brake hose in front of the number
plate and through the cable guide.
E
Pass the clutch cable through the cable guide
on the number plate.
1
Brake hose
2
Master cylinder
3
“ENGINE STOP” button lead
4
“ENGINE STOP” button
5
Throttle cable
6
Clutch cable
7
Clamp
8
Cable guide
1C3-9-32-2B 4/29/06 10:16 AM Page 34
