4-37
CLUTCH AND PRIMARY DRIVEN GEAR
ENG
5. Install:
9
Friction plate
1
9
Clutch plate
2
NOTE:
9
Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
9
Apply the transmission oil on the friction plates
and clutch plates.
6. Install:
9
Bearing
1
9
Plain washer
2
9
Circlip
3
To push rod 1
4
.
NOTE:
Apply the lithium soap base grease on the bear-
ing and plain washer.
7. Install:
9
Push rod 2
1
9
Push rod 1
2
NOTE:
9
Apply the transmission oil on the ends of the
push rod 2.
9
Install the push rod 2 with its smaller end
a
toward you.
8. Install:
9
Pressure plate
1
9. Install:
9
Clutch spring
1
9
Screw (clutch spring)
2
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
10 Nm (1.0 m•kg, 7.2 ft•lb)
5MW-9-30-4B 7/3/00 6:32 PM Page 22
