5-63
CHAS
REAR SHOCK ABSORBER
EC5852B3
Rear shock absorber
1. Install:
9
Dust seal
1
9
O-ring
2
9
Collar
3
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing.
9
Apply the lithium soap base grease on the dust
seals, O-rings and collars.
2. Install:
9
Bush
1
9
Collar
2
9
Dust seal
3
NOTE:
9
Apply the molybdenum disulfide grease on the
bearing.
9
Apply the lithium soap base grease on the
bush, collars and dust seals.
9
Install the dust seals with their lips facing out-
ward.
3. Adjust:
9
Spring length (installed)
a
*For EUROPE
NOTE:
The length of the spring (installed) changes 1.5
mm (0.06 in) per turn of the adjuster.
c
C
Never attempt to turn the adjuster beyond
the maximum or minimum setting.
4. Tighten:
9
Locknut
1
Spring length (installed)
a
a
:
Standard
length
244 mm (9.61 in)
*267 mm (10.51 in)
Extent of
adjustment
242~260 mm
(9.53~10.24 in)
*257~275 mm
(10.12~10.83 in)
5MW-9-30-5D 7/6/00 11:32 AM Page 24
