4 - 57
ENG
OIL FILTER ELEMENT, WATER PUMP AND RIGHT
CRANKCASE COVER
REMOVAL POINTS
Impeller shaft
1. Remove:
●
Impeller
1
●
Washer
2
●
Impeller shaft
3
NOTE:
Hold the impeller shaft on its width across the
flats
a
with spanners, etc. and remove the
impeller.
EC4G3210
Oil seal
NOTE:
It is not necessary to disassemble the water
pump, unless there is an abnormality such as
excessive change in coolant level, discolora-
tion of coolant, or milky transmission oil.
1. Remove:
●
Bearing
1
2. Remove:
●
Oil seal
1
INSPECTION
Oil delivery pipe
1. Inspect:
●
Oil delivery pipe
1
Bend/damage
→
Replace.
Clogged
→
Blow.
