4 - 98
ENG
TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
●
2nd wheel gear (28T)
1
●
4th wheel gear (27T)
2
●
3rd wheel gear (29T)
3
●
5th wheel gear (25T)
4
●
1st wheel gear (30T)
5
●
O-ring
6
To drive axle
7
.
NOTE:
●
Apply the molybdenum disulfide oil on the
1st, 2nd and 3rd wheel gears inner circum-
ference and on the end surface.
●
Apply the molybdenum disulfide oil on the
4th and 5th wheel gears inner circumfer-
ence.
●
Apply the lithium soap base grease on the O-
ring.
3. Install:
●
Washer
1
●
Circlip
2
NOTE:
●
Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the washer and
gear
b
.
●
Be sure the circlip end
c
is positioned at
axle spline groove
d
.
4. Install:
●
Collar
1
NOTE:
●
Apply the lithium soap base grease on the oil
seal lip.
●
When installing the collar into the crankcase,
pay careful attention to the crankcase oil seal
lip.
