5 - 37
CHAS
FRONT FORK
21. Measure:
●
Distance
a
Out of specification
→
Turn into the
locknut.
Distance
a
:
20 mm (0.79 in) or more
Between damper rod
1
top and
locknut
2
top.
22. Loosen:
●
Rebound damping adjuster
1
NOTE:
●
Loosen the rebound damping adjuster finger
tight.
●
Record the set position of the adjuster (the
amount of turning out the fully turned in posi-
tion).
23. Install
●
Cushion rubber
1
●
Washer
2
●
Spacer
3
To front fork cap bolt
4
.
NOTE:
Install the cushion rubber with its smaller
dia.end
a
facing the front fork cap bolt.
24. Install:
●
Push rod
1
●
Fork spring
2
NOTE:
●
Install the fork spring with the damper rod
3
pulled up.
●
After installing the fork spring, hold the
damper rod end so that it will not go down.
25. Install:
●
Front fork cap bolt
1
Fully tighten the front fork cap bolt onto
the damper rod by hand.
