5 - 38
CHAS
FRONT FORK
26. Tighten:
●
Front fork cap bolt (locknut)
1
NOTE:
●
While compressing the fork spring, set the
thin type spanners
2
between the spacer
3
and spring guide
4
.
●
Hold the locknut
5
and tighten the front fork
cap bolt with specified torque.
27. Install:
●
Front fork cap bolt
1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
28. Install:
●
Protector guide
1
Installation
1. Install:
●
Front fork
1
NOTE:
●
Temporarily tighten the pinch bolts (lower
bracket).
●
Do not tighten the pinch bolts (upper bracket)
yet.
2. Tighten:
●
Front fork cap bolt
1
3. Adjust:
●
Front fork top end
a
Front fork top end (standard)
a
:
5 mm (0.20 in)
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
